Tile paving has always been a meticulous job. The quality of the paving has a great influence not only on the skill of the decorator, but also on some auxiliary tools. Then The beauty of tile paving is naturally indispensable for the existence of tile crosses. It can not only make the tiles smoother but also make the tiles more beautiful. Then let’s learn more about Tile Cross in more detail! ! !
1. What is a ceramic tile cross
1. Definition of tile cross
Tile crosses are generally white and have the characteristics of good toughness, good tensile strength, non-toxic, impact resistance, moisture resistance, chemical resistance, etc.
2. The use of ceramic tile crosses
Place it in the middle of the tiles and adjust the gap size to make the tiles more beautiful and smoother. Tile crosses can prevent wall tiles from falling due to new construction.
2. The function of ceramic tile cross
1. Flexible use
The tile cross can be adjusted up and down at will, which can repair the displacement and sagging of the tiles due to excessive pasting. Construction tools during decoration are also constantly updated, which can better ensure the quality of construction. In the past, it was too inconvenient to use wooden strips and wire pipes, but it is much more convenient to use crosses.
2. Prevent thermal expansion and contraction of ceramic tiles
Decoration in different seasons will be affected by temperature and humidity. These problems can be avoided during the construction process of the cross. Because the ceramic tiles and cement, sand and gravel slurry will expand and contract to a certain extent, if no seams are left, the ceramic tiles will bulge or crack in the later stage.
3. Prevent errors in ceramic tiles
If ceramic tiles are laid without using tile crosses to leave seams, the joints of the ceramic tiles will be uneven, which will affect the appearance.
4. Make the tiles paved better
The use of crosses can leave a gap of the width of a piece of paper between the wall tiles at the same time, which can prevent the wall tiles from being stretched due to shrinkage when the cement is drying, and avoids uncontrollable human factors.
3. What are the specifications of ceramic tile crosses
1.0MM, 1.5MM, 2.0MM; 2.5MM, 3.0MM, 4.0MM, 5.0MM; 6.0MM, 8.0MM, 10.0MM, etc. The 1.5MM specification means the width is 1.5MM, and the others are also understood in this way.
4. Where are ceramic tile crosses of different specifications used
1.0MM and 1.5MM are used for polished tiles and other bright tiles; 2.0MM are used for wall tiles;
2.5MM, 3.0MM are used for small size ceramic tiles;
4.0MM, 5.0MM, 6.0MM are used for medium-sized ceramic tiles;
8.0MM and 10.0MM are used for large-size ceramic tiles and outdoor tiles.
After reading the above content about Tile Cross shared by the editor, do you have a more detailed understanding of it? Therefore, in the process of laying ceramic tiles, if you want the tiles to be laid beautifully, the existence of tile crosses is of course indispensable. Well, the above is what I have shared today. I hope it can be helpful to you. Come on!
(The above pictures are all from the Internet, any infringement will be deleted)
